Eco Friendly Home Projects

Dear readers, this blog will no longer be updated.  All contents will be moved to: upcycleliving.blogspot.com Please update your link, and we hope to see you again soon  😊 I have this thing about candles. Plain white or colourful candles, decorative or burning candles, or even melted wax; it's all so beautiful. I do however, hate the fact that they don't always burn perfectly and leaving me with lots of half-burned candles, or candles that can't be used anymore because the wick is stuck inside the wax, etc. This is what I often get left with, and I'm certainly not going to let them go to waste. So I'm going to have a big melt down - for the wax 😀 It's not a very complicated process, just a little tedious and hot. What I need are: A big pot Some used disposable chopsticks Some parcel string (as I haven't any wicks readily at home) Glass containers/candle holders - to clean up glass candle holders: boiling ...

Dear readers, this blog will no longer be updated.  All contents will be moved to: upcycleliving.blogspot.com Please update your link, and we hope to see you again soon  😊 Connect all the tinsels together to make a really long one This time I first wrap up the tripod with some red net fabric we saved from a gift hamper. This way the tinsel holds better in place when twirled around the frame. And the angel lights are placed first so that the wire is not visible over the tree. Start the long tinsel on the top with a knot then twirl it around the tripod until it's all covered up. Tie the end to one of the tripod legs to secure it.

Dear readers, this blog will no longer be updated.  All contents will be moved to: upcycleliving.blogspot.com Please update your link, and we hope to see you again soon  😊 Our old Christmas wreath made from old mince pie boxes has way passed its sell-by date, so it's time to have a new one made. This new one can't be easier; I found an old wire in the tool box (probably taken out from an old hanger) and bent it into a circle, with both ends twisted into small loop then tied with a bendable twist tie wire. I then twirled the silver tinsel (found in the box with old Christmas decoration) around the wire, secured by twisting the ends together. Finally slapped on a decorative bell and ribbon - again, from the Christmas decor box. Not a single penny was spent. Not even an inch of cello tape. Welcome to the first day of Advent!

Dear readers, this blog will no longer be updated.  All contents will be moved to: upcycleliving.blogspot.com Please update your link, and we hope to see you again soon  😊 Until we started buying screw top wine, I had been painstakingly saving up all the wine corks: cleaning, drying and storing. Thanks to my inexplainable sentiment towards the little brown thing and the thought that one day I would be able to use them for something, I've filled up a whole large shoe box. And they had been in there for 7 long years! Just when I was about to give up and decide to clean them out, I caught a glimpse of a trivet made of wine corks in the background of a TV show. Obviously this is not an original idea and surely there must be others who've already done so, but hey I managed to use up all the corks and turned them into something useful - that's good enough for me. Most importantly: I get to keep them, not bin them ;)

Dear readers, this blog will no longer be updated.  All contents will be moved to: upcycleliving.blogspot.com Please update your link, and we hope to see you again soon  😊 Angel lights are placed inside of the tree for a softer feel The bad news is, our tripod was broken (the top bit - heaven knows when and how that happened). The good news is, I can now use it for something else with no guilt (especially to all the photography enthusiasts out there) - as a base for our 2015 DIY Christmas tree! DIY Christmas tree from a broken tripod and some Christmas tinsel This has got to be the easiest-to-assemble Christmas tree to date. All I did was set the tripod up to the height I want, then tie the strips of Christmas tinsel around it. Everything can be packed away easily and reused for next Christmas. The wired ribbon has been used a few times on the 2012 Christmas tree on the wall , the 2010 CD Christmas tree , and our very first DIY Christmas tree in 2008 ...

Dear readers, this blog will no longer be updated.  All contents will be moved to: upcycleliving.blogspot.com Please update your link, and we hope to see you again soon  😊 We're going to have a family dinner right before Halloween so we gotta have something special for the kiddies. I've always wanted to let them have a little trick or treat for fun but I'm really skeptic about buying the ready made ones and make some rich business owners even richer by producing more plastic stuff. So a DIY paper maché Jack o Lantern is an obvious choice. Here are the material used: 2 old unused balloons from last Christmas, blew them up and wrapped each up with a layer of cling film (for easy removal when the glue is dry), and these are the base mould for the pumpkins. Old newspaper and old receipts, torn into tiny strips. Glue made from tapioca flour Leftover white base coat paint Acrylic colours String from an old wrecked drawstring bag First layer for the shape...

Dear readers, this blog will no longer be updated.  All contents will be moved to: upcycleliving.blogspot.com Please update your link, and we hope to see you again soon  😊 The biggest issue we have with these paper lanterns was that they get burnt easily, so a non-fire related solution is essential. I saw some lanterns that use bulbs and thought that we can have our DIY ones: If the power sockets were designed in a more intelligent way, i.e. higher up on the wall and not all the way down close to the floor, we could have hung the lanterns horizontally, across the window. But since the angel lights cable isn't long enough and this is the furthest it can reach so it will have to do for now, until I get another light bulb above my head :) This is what's happening inside the lanterns: Every 7 or 8 bulbs are tied into a cluster using used twist tie wires (I saved them from all sorts: loaf of bread, electrical products, etc). Each cluster ...

Dear readers, this blog will no longer be updated.  All contents will be moved to: upcycleliving.blogspot.com Please update your link, and we hope to see you again soon  😊 and serve as a beautiful centre piece on the coffee table: Now they are quite safe to handle, and could probably last much longer (and I can reuse them next year!).

Dear readers, this blog will no longer be updated.  All contents will be moved to: upcycleliving.blogspot.com Please update your link, and we hope to see you again soon  😊 The process was really simple: mark two identical shapes of a snake on it with a 2B pencil, cut around them with 1-cm space allowance.  Stack the 2 shapes together, place a red ribbon of 4" length on where the mouth is (as the tongue) and stitch along the marked line, leaving about 4" of opening.  Fill it up with the old pillow stuffing, bit by bit. Then stitch up the opening.  As for the patterns on the snake, they were some lace trimming from my craft box. The eyes were buttons from my sister's dress (buttons that she hated and removed so I saved them). The red ribbon was saved from some old present we received. That was my mink boa for the evening, and good for sofa decoration for the year. Note: The remaining Ikea blanket has been made into a  wine bottl...

Dear readers, this blog will no longer be updated.  All contents will be moved to: upcycleliving.blogspot.com Please update your link, and we hope to see you again soon  😊 When I made the Mini Cardboard Tabletop Christmas Tree , I thought I was going to settle for just that. After all, we are packing up for the move; it's going to be a sad little Christmas. And as I was taking down all the 3M hooks here and there to leave the landlord a clean wall, these little 3M wonders gave me an idea. Well you see, I've bought stashed away quite a bit of the replacement 3M stickers for more than a year now; and they don't work well after hibernating in a shoebox, in a damp house in a humid country for that long. Now they will have the opportunity to shine (literally) before they announce retirement. So all together, 8 used and reused 3M wire hooks, 8 not-working-so-well 3M removable stickers, 1 good old reliable Christmas wired ribbon, angel lights from 2010 Christmas ...

Dear readers, this blog will no longer be updated.  All contents will be moved to: upcycleliving.blogspot.com Please update your link, and we hope to see you again soon  😊 This Christmas is going to be a quiet one for us as we are in the midst of moving, so a big(ish) tree like previous years is just impractical. But not having a tree at all would make it even sadder. And the solution is: a tiny, mini, tabletop cardboard Christmas tree!    The making is pretty simple: View larger image in new tab or window 1. Material: some patterned or printed cardboard (old Christmas cards, Christmas merchandise packaging, etc), I cut these from last year's Christmas crackers packaging box. 2. Cut them into equal sizes: 2 per tree. 3. Take 2 and stick them together, back to back using double sided tape. 4. Make sure they are adhered nicely together, trim away any jutting out edges. 5. Cut each piece into 2 equal pieces. 6&7. Using a pen...

Dear readers, this blog will no longer be updated.  All contents will be moved to: upcycleliving.blogspot.com Please update your link, and we hope to see you again soon  😊 It's that time of the year again - you're right - time to get busy preparing for Christmas! And what can be more fun than getting the tree up? As usual, the rules here is to have nothing (or very little) bought. Everything must be old, used, or recycled. We had a great success last year with our CD Christmas tree , and the CDs were then stored away for their future use in God-knows-what; maybe rebuild the same tree, who knows? But this year we're going to be away for the holiday so we'll just have something really simple and doesn't require much work. As I was going through my craft boxes, I found this stack of beautiful glossy cardboard that used to be the body of some Christmas crackers we used last year (yes I actually saved those bits). Was initially thinking of making some p...

Bought a pair of oven gloves last year, which can't withstand a single wash - the inside was some sort of fluff that started coming off. So lesson learnt: must only get oven gloves that are fully fabric made. Anyways, being the hogger that I am, throwing away a rather new pair of (non-functioning) oven gloves still bothers me. So I've turned them into a pair of mini Christmas stockings, as they are red and green and look Christmasy. The magic wand I used here is a 1.5-inch needle and some magical red threads :-) Here are the oven gloves-turned-Christmas stockings: Here is what they looked like before: Being taken apart for cutting: Nothing's wasted!

We like throwing small dinner parties and enjoy some home cooked food and nice wines - with proper crockery and cutlery - NO disposable ones! But having to keep washing up and drying wine glasses is a pain, especially when everyone seems to get their wine glasses mixed up and decided to get a fresh one. If only we can have something to individualise each wine glass, but obviously not buy putting a horrible looking sticker label over the glass. When I first saw this brilliant product at a department store, I knew that's what I need to add to our wine accessories - some wine glass charms! But they aren't cheap; in fact, they are really expensive! Minimum RM50 for a box of 6 or 8 charms, and that's all you can get: just the 6 or 8 different designs. That's when I decided to make our own customised wine glass charms. I started collating everything I need: old pendants, old earrings, beads from some accessories came as unwanted gifts; and bought a bag of wine glass charm hoo...

Have you ever bought electrical appliances or laptops, etc that came with not one but several of these twist tie wire thingies? Of course you have, and they will keep coming for as long as you plan to buy more in the future. Some people find them annoying because apart from tying some wires for storage purposes, they would just become clutter. Personally, I find them highly useful in aiding me in my daily chores and getting the house organised. Here is what I did with some of them: An extended hook for this calendar with a hole that's too small to go on the existing hook: The previous tenant left behind quite a few pointless nails - like this one that is too deep into the wall - which I can hardly hang anything on. So the twist tie wire came in handy as an extension: Due to the flexibility of these twist tie wires, they can be twisted into any shape and form to adapt to your needs. They are also quite strong and sturdy so I've used some to tie the new roller blinds to the old b...